Showing posts with label sterling silver. Show all posts
Showing posts with label sterling silver. Show all posts

Wednesday, April 28, 2010

Pop Goes The Pendant

A couple of months ago I got an email from an Etsy.com shopper, (from Belgium!), asking if I would be able to make her a bracelet like the one worn by Megan Fox in the Transformers movie. She sent a blurry screen capture of the bracelet on the actress. It was a pretty simple design, just a heavy link chain in sterling silver with a big key hanging from it. I decided to rent the movie to get a better look at it, to be sure that I got it right, and in the whole film, I don't think there were more than 45 seconds of screen time with that bracelet. I went ahead with it and, from what I could tell, it came together quite well and she was very pleased with the product.

She was so pleased, in fact, that she emailed me again and asked if I might be willing to make another piece for her. This time, she had better pictures. It was a pendant that is worn by the lead actress in a television show called the Vampire Diaries. I've never seen the Vampire Diaries, (I don't have cable.) But from the pictures it looked like a fun challenge. The design is sort of complicated, lots of little pieces. In the show it is a locket. In my version, I had to simplify it. I didn't have the time, (or the skills) to make an exact replica.
My Belgian friend agreed to the simpler pendant design and decided that she would like a different stone instead of the garnet, she wanted a lapis lazuli cabochon instead. I found a stone for her and went about fabricating the many pieces of the pendant. The main pendant is made of two sterling silver discs, domed and soldered together. The embellishments on the piece are silver balls made from balled-up wire, and wire pieces with balled-up ends. So to make the piece, I started with shaping the silver discs. Then I made lots of silver balls of different sizes by melting short pieces of wire, on a charcoal block, until they rolled up into balls. Next, I cut several lengths of sterling wire and melted each end to create a ball-end. Each of the wires were then shaped and cut to fit the pattern on the pendant in the picture. The bail for the necklace was another wire, balled at both ends and shaped to fit atop the piece.

When you work with metal and fire, there are lots of things that are important to know. It is easy to set things on fire, or melt things unintentionally, or burn yourself when working with torches. Sometimes this is part of the learning process. This is why people get paid lots of money to make jewelry. This is why people get trained by folks who already know this stuff. Well, I have gotten some training, and I have done some reading, and I have burned myself and melted a few things I didn't mean to melt. This pendant was a new lesson for me and one I will not soon forget. I am writing this to pass it on to you folks who may try this sort of thing at home.

After I got all my little pieces shaped, balled, domed, cut and such, I took the now domed, silver discs and soldered them together to create a round silver pillow shape. It came together nicely. I filed off the excess solder and refined the finish a little so that I could begin the process of soldering on all the little pieces that I had made. Setting up the pieces to solder, I realized that I would need to get several parts set so that I could solder many down to the piece at one time. This would require sweat-soldering the little parts, which is basically, melting solder onto each of the individual pieces, so that they would solder onto the larger piece when it was heated to soldering temperature. When you are attaching little parts to a larger part, you have to get the larger part hot enough to melt the solder on the little part, without melting the little part into a puddle on your larger piece. This can be a challenge. Sweat-soldering would give me a little more control over all those little pieces and I could get nearly all of them set up on the pendant and get them soldered down at one time. The less I had to heat that large piece, the better. Each time you heat a piece that has been soldered already, you have to use a different solder with a lower melting point, to avoid melting the last solder. It is a complicated thing to have many pieces to attach because you can only heat the thing so many times before you mess up something that you've already done. So, I was a little stressed as I was getting this all set up. I do a lot of praying, (and cursing), when I'm soldering.

Well I had it set up very well, I had about half of my little pieces set upon my little silver pillow and I had two torches going. I swirled the flames around and around trying to heat up the pillow nice and evenly. It was just beginning to glow and then, BANG!!! and someone screamed, (maybe that was me) It sounded like a gun went off! My pendant had disappeared right before my eyes. All my little pieces were gone. My heart was racing. Frantic footsteps pounded up the stairs and River found me there staring at my soldering bench in disbelief.

River asked if I was ok and I checked myself and realized I was. I looked all around my soldering bench and found my silver pillow hiding behind some fireproof soldering brick. My pretty little silver pillow popped! I had soldered the two pieces together and left no hole for air to escape. So stupid! What a rookie move! I didn't think about it, but you can't heat most things that are air-tight without them popping. Air expands as it heats. That air inside the pendant expanded enough to break the soldered seam on the pendant. Wow.

I looked all around the floor and found some of the little wire pieces that I had made, but I ended up remaking several of them. I had set a deadline for myself to get the piece done, so I needed to get back to it but I was frankly a little skittish after that. I knew logically that if I left the seam open, it would not be able to explode again, but fear is an emotion, and emotions aren't logical. I set up the piece again, with many of the little pieces carefully placed and soldered them down. After soldering all the pieces on, I felt a little calmer and a lot smarter.
When I was finished with it, I was glad to be done. Even though it wasn't a perfect replica, I was pretty happy with how it turned out.

I got an email last week from my friend in Belgium. She wrote again to say that she loved the piece and that she has gotten lots of compliments on it.































Friday, April 3, 2009

Bi-metal meltdown! Part 1

So, I made this wedding ring, my first piece combining gold and silver together. It was surprisingly challenging. I assumed that I could just solder the gold to the silver and it was a simple as that. Not. I set up the ring stock with the silver band on the bottom and narrower gold band on the top. I used gold solder, thinking that would make my joints look better and make the gold stand out more against the silver. Well, the first thing that happened was that when I heated the perfectly aligned, fluxed pieces, the gold piece slid sideways and became attached, off center to the silver piece. Nice. So I heated again and pulled the gold off the silver and took another stab at it. I just couldn't get it to be centered and the solder was not flowing. I began to get nervous. I had to call my mentor for help. I didn't want this to be FUBAR.

So, I contacted my personal metal smithing Yoda. He was more than happy to help. I went down to his studio with my catawampus piece. He took a look and went to his soldering bench. He lit up his big acetylene torch and heated the piece until it looked like it was going to melt into a pool on the soldering pad. He pulled off the gold and I cleaned up the pieces so that we could take another try at it. I wanted to know what the "right way" to do it was.

After I finished filing and sanding off all of the leftover gold and solder, he laid the two pieces together, just as I had done originally, and then he held them together with self-locking tweezers. Ah, that was it! Of course, you have to clamp them together to keep them straight! Well, not so much. He had a heck of a time getting the solder to flow, just as I did. I thought it was my lame little torch, or my lack of information, no, just my luck. Again he heated it until it looked like it was just going to melt away, in my head I was praying that I wouldn't have to go buy more gold to make this ring again. Finally, it was soldered on fairly well, and I took it and cleaned it up. When I was cleaning it I noticed, that it was not straight, (Even when Yoda did it the "right way" with a tweezers). The gold was just going to be crooked I thought. What can I do to fix it? Yoda said to me, 'that's what files are for'.

So I filed and filed until it looked straight enough to me and then it was time to move on to the next step of cutting it the proper length, shaping it into a ring and soldering it closed. I asked Yoda, what his technique was for assuring the measurement was correct. He did as I do, and got the Bible according to Oppi Untracht. We looked up the proper length and he cut it. I was hoping for a little tip, there was none. In the construction industry they say "Measure twice. Cut once." I think those are good words to go by, (and easy to remember). Yoda was a pro, so I had no doubt that he could measure and cut without my assistance. Not that day. I guess that I could have said that thing about measuring twice, but I didn't. It was about 2 full sizes too short. Aaaaagh, now what!

Yoda didn't sweat it; he just went about soldering it closed. "Then we can size it up with the ring sizer" he said. The silent prayers began again. It took about 10 tries to get it up to the size that it was supposed to be. Every couple of times that you stretch it in the stretcher it needs to be annealed so that it doesn't break. When you hammer on metal it stiffens, when you anneal it, (heat it until its red), you rearrange the molecules in the metal so it becomes malleable again. So, stretch a little, anneal, stretch a little more, anneal, etcetera until you reach the size you need it to be.As Yoda stretched the ring the barely noticeable join in the gold of the ring became a noticeable gap. The gold didn't expand at the same rate as the silver. So the silver would stretch more than the gold therefore, gappage. I have a somewhat critical eye, so I am not a good judge of my own work when there is a flaw. I tend to want to throw the baby out with the bathwater. But, I couldn't do that with this ring. I had a client waiting for it and I needed to get it done. I was not going to disappoint him or his wife, who convinced him to have me make his replacement wedding ring. This was the ring I had and I was going to have to make it work. I was going to save the baby and the mother and then take a bath.

I thanked Yoda for his assistance, paid for his time and took my pathetic looking project (FUBAR),home to my studio to see what I could accomplish on my own. I always learn from Yoda. Sometimes it's not the lesson I intended, but that's life, eh? What I knew when I left there that day was; I knew what I needed to know in order to do what I had to do. I just hadn't the confidence of a man doing it for 30 years. It's not always possible to avoid mistakes; it is about being able to fix them.

With time, files, my flex shaft and some emery boards I turned that ugly expensive piece of metal (FUBAR),into a pretty ring, with a slightly noticeable gap. I presented it to my client and he was very happy with it. It was a little snug, but he had lost the last one because it fell off. So he decided he would give it a try and let me know if he needed it to be sized up again. (Again with the silent prayers.)

Friday, February 20, 2009

Shop Renewal Clearance Sale- 50% Off


I have a nice selection of bracelets, necklaces and earrings, and sets, made with semiprecious beads and sterling silver beads and findings. I really love finding pretty beads and combining their metaphysical energies to create pieces that are beautiful but with a purpose. I have a real affection for handmade sterling silver beads from Bali, so you will see them in most of my beaded jewelry.

I started making beaded jewelry about 15 years ago. As I have learned more about the stones and beads in my jewelry I have developed new interests in metal work and other styles of jewelry. So I am shifting my focus. And as I do, I am letting go of a lot of the pieces that I have made in my 'beaded period' at incredible prices.

Every piece of beaded jewelry in my shop is now on sale at 50% off. I have never had a sale like this and I'm excited to see what will happen.Here's the link: http://www.etsy.com/shop.php?user_id=5287913&section_id=5933218

I'll be adding more sale items soon, so bookmark my store and check back again.